With this free standing lace machine embroidery design you will create an Easter Bunny window decoration which is approximately 14.5 inches high and 10 inches wide (256 x 368 mm).
The Easter bunny free standing lace embroidery design is made up of 6 parts.
Each of the parts will fit in 5x7 (130 x 180) or larger hoop. The largest part has 41,672 stitches and the smallest - 8,489.
The total number of stitches in all 6 parts is approximately 147,000.
Unlike other projects of similar type, this freestanding lace Easter window decoration is designed using a different "assemble as you stitch" technique.
This means that the parts of the Easter bunny embroidery design are connected to each other in the hoop, in the process of stitching the lace out.
This allows for creating a high quality embroidery with no visible seams between the elements. When done properly, the Easter bunny window decoration would look like it was stitched out in one piece.
The design comes with step-by-step instructions in PDF format.
We have made available the tutorial for this Easter window decoration on line, so you could get an idea of the procedures involved. (Click to download)
The tutorial is also available for viewing on line in our Machine embroidery tutorials section.
Important notes:
In order to do this one properly and get good results the lace MUST be very well stabilized. So, you will need high quality water-soluble stabilizer. The Easter bunny featured on this page was created using Vilene DO1O4 which is thicker and fabric-like and we would recommend using stabilizer of this type.
Thinner plastic-like stabilizer used in more layers may also do the job but we would recommend that you should first test its performance.
In the process of creating the ornament you will also need adhesive spray or glue stick to attach pieces of stabilizer to each other. You will want to make sure that the glue you'll be using will be able to reliably stick together pieces of the stabilizer you have, that it will not damage the stabilizer and that the glue is water-soluble, so that it could be washed away.
The Easter bunny free standing lace embroidery design is made up of 6 parts.
Each of the parts will fit in 5x7 (130 x 180) or larger hoop. The largest part has 41,672 stitches and the smallest - 8,489.
The total number of stitches in all 6 parts is approximately 147,000.
Unlike other projects of similar type, this freestanding lace Easter window decoration is designed using a different "assemble as you stitch" technique.
This means that the parts of the Easter bunny embroidery design are connected to each other in the hoop, in the process of stitching the lace out.
This allows for creating a high quality embroidery with no visible seams between the elements. When done properly, the Easter bunny window decoration would look like it was stitched out in one piece.
The design comes with step-by-step instructions in PDF format.
We have made available the tutorial for this Easter window decoration on line, so you could get an idea of the procedures involved. (Click to download)
The tutorial is also available for viewing on line in our Machine embroidery tutorials section.
Important notes:
In order to do this one properly and get good results the lace MUST be very well stabilized. So, you will need high quality water-soluble stabilizer. The Easter bunny featured on this page was created using Vilene DO1O4 which is thicker and fabric-like and we would recommend using stabilizer of this type.
Thinner plastic-like stabilizer used in more layers may also do the job but we would recommend that you should first test its performance.
In the process of creating the ornament you will also need adhesive spray or glue stick to attach pieces of stabilizer to each other. You will want to make sure that the glue you'll be using will be able to reliably stick together pieces of the stabilizer you have, that it will not damage the stabilizer and that the glue is water-soluble, so that it could be washed away.
-
Ask a question about this product
Important notes:
1. Before adding a design to cart, please make sure that you have picked the correct format for your embroidery machine
and that design size will fit in the working area of your machine's hoop .2. Delivery is made by E-mail only. Designs will be sent as file attachments as soon as possible.
Subject to time difference delivery may take up to few hours.
